Signamax
™
10/100/1000T/TX to 1000SX/LX
Gigabit Ethernet Media Converter
User’s Manual
1
FCC Statement
The FCC (Federal Communications Commission) restricts the amount of
radio frequency emission and radiation coming from computer equipment.
The equipment introduced in this manual has been tested and found to
comply with the limits for a Class A digital device pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user is required to correct the interference at
his/her own expense.
Any changes or modifications not expressly approved by the manufacture
would void the user’s authority to operate the equipment.
Trademarks
Product names mentioned in this manual may be trademarks or registered
trademarks of those products.
All trademarks or brand names mentioned are properties of their respective
companies.
Preface
This manual describes how to install and use the Signamax
™
Gigabit
Ethernet Media Converter. The Converter introduced here provides one
channel media conversion solution:
10/100/1000BaseTX
↔
1000BaseSX/LX
The Gigabit Ethernet Media Converter fully complies with IEEE802.3
10BaseT, IEEE802.3u 100BaseTX, IEEE802.3ab 1000BaseT, and
IEEE802.3z 1000BaseSX/LX Ethernet standards.
In this manual, you will find:
y
Product
overview
y
Features on the media converter
y
Illustrative LED functions
y
Installation
instructions
y
Specifications
