SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
59
2.6.13 Security command mode
Enter the security command in Configuration mode. Then, the security mode shows as
follows:
SWH(config)# security
SWH(config-security)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
opt82 Enter Opt82 Cmd. Mode opt82
sourceguard Set Source Guard source <port_list> <type>
snooping Enter DHCP Cmd. Mode snooping
isolation Set Port Isolation isolation <enable|disable>
ipv6-filter Set IPv6 Filter ipv6 <enable|disable>
upnp-filter Set UPnP Filter upnp <enable|disable>
static-ip Enter Static IP Cmd. Mode static-ip
storm Enter Control Cmd. Mode storm
anti-bcast Enter Anti-bcast Cmd. Mode anti-bcast
exit Exit from current mode exit
show Show SKA Settings show
SWH(config-ska)#
Prompt
Command & Parameter
Description
mode <enable | disable>
To enable or disable DHCP Opt 82 Relay
Agent Global setting.
port <port_list>
<port_list>: Specify a port number or
multiple port numbers with the format 5, 7, 8,
9, 12 or
5, 7-9, 12
For example:
SWH(config-security-opt82)# port 1-4,10-
15,18,19
SWH(config-
security-opt82)#
trust-port <port_list>
When Trust Port is set to “enabled”,
a.it will receive packets with Agent
information and the Managed Switch will
forward them.
b.it will receive packets without Agent
information and the Managed Switch will add
Agent information.
When Trust port is set to “disabled”,
a.it receives packets with Agent information
and the Managed Switch will drop them.
b.it receives packets without Agent
information and the Managed Switch will add
Agent information.
<port_list>: Specify a port number or
multiple port numbers with the format 5, 7, 8,
9, 12 or
5, 7-9, 12
For example:
SWH(config-security-opt82)# trust-port 1-
