999 N.W. 159th Drive
M i a m i , F L 3 3 1 6 9
T e l : 8 0 0 . 4 4 6 . 2 3 7 7
CONNECT WITH US
QSG-SC120XX_A-2-22
COPYRIGHT 2007 SIGNAMAX, INC. ■ ALL RIGHTS RESERVED ■ SPECIFICATIONS SUBJECT TO CHANGE
Quick Start Guide
E-130 Series PoE and Ethernet Extenders
1.
Connect the PD Input power to a PoE Power Sourcing Equipment using
a standard 100-ohm Category 5e or better twisted-pair cable.
1.
For RJ-45 ports, connect 100-ohm Category 5, 5e or better twisted-pair
cable
2.
As connections are made, check the port status LEDs to be sure the
links are valid. See the LED description table on the next page.
1.
Verify basic switch operation by checking the system LEDs. When oper-
ating normally, the Power LED should be on and green.
Connect PoE Power
Verify Switch Operations
Connect Network Cables
LED
Status
Description
PWR
ON
Switch operating normally.
OFF
No DC power is connected or the switch has failed.
LINK
ON
Port has a valid link
BLINKING
Port has network activity
OFF
The link is down
PoE
ON
A PoE device is connected and delivered PoE power
BLINKING
PoE Error: short circuit or current overload
OFF
Doesn’t deliver PoE power
LED Description Table
