Document Reference: X-0036-01-07 Cadmus & Ratifi Operating Manual
Drawn: 13/11/2020
Page 51 of 66
2.1.5
Graph
Previously it has been shown how to generate a graphs or tables via the “LOCATION” link in OVERVIEW/DEVICES or
HEALTH. The Graph screen allows the user to save
preconfigured graphs, where multiple device and/or channels can be overlaid on the same graph.
2.1.5.1
Add Graph
Select “ADD GRAPH” using the button indicated below.
The “NEW GRAPH” window will appear. Give t
he graph a name and then select the device you wish to graph from the drop down list. Only devices enabled on your
system will be displayed in the list. Once the device is selected, the window will update so you can select any enabled channels on the selected device. Additional
devices can be added to the same graph by selecting “ADD NOTHER LOCATION” and repeating the sequence.
2.1.5.2
Selecting a Graph
Once you have one or more graphs configured on the system. A graph will automatically load when the graph screen is selected. If more than one graph is configured
using the drop down to select which graph you wish to view, and then select “RELOAD”. The drop down also allows the user to e
dit or delete a graph configuration.