2 4
OPERATION
D e l i v e r i n g h o t w a t e r
C AU TION
Do not leave the appliance unattended w hile hot
w ater is being delivered.
1
Make sure the hot w ater/steam spout is
attached correctly to the hot w ater/steam
connection nozzle;
2
Place a container under the spout (as close
as possible to avoid splashes).
3
Select HOT WATER from the homepage.
The corresponding image appears on the
display, together w ith a progress bar w hich
fills gradually as preparation proceeds.
4
The machine delivers hot w ater, then delivery
stops automatically.
To interrupt hot w ater delivery manually,
press
.
NOTE
•
If " Energy Saving" mode is active, there may
be a few seconds delay before hot w ater is
delivered.
•
Preparation of hot w ater can be customised
(see sections “Customising beverages” and
“Memorising your personal profile”).
S t e a m D e l i v e r y
C AU TION
Do not leave the appliance unattended w hile
steam is being delivered.
1
Make sure the hot w ater/steam spout is
attached correctly to the hot w ater/steam
connection nozzle.
2
Fill a container w ith the liquid to be heated
or frothed and immerse the hot w ater/steam
spout in the liquid.
3
Select "
STEAM" from the homepage.
The corresponding image appears on the
display together w ith a progress bar w hich
fills gradually as preparation proceeds and
after a few seconds, steam to heat the liquid
is delivered from the hot w ater/steam spout;
4
When the required temperature or level of
froth is reached, interrupt steam delivery by
pressing
.
W AR NING
Alw ays stop steam delivery before extracting the
container containing the liquid to avoid burns from
splashes.
NOTE
If “Energy saving” mode is active, there may be a
few seconds delay before steam is delivered.
Ti p s f o r u s i n g s t e a m t o f r o t h m i l k
•
When choosing the size of the container, bear in
mind that the liquid doubles or triples in volume.
•
For a richer denser froth, use skimmed or partially
skimmed milk at refrigerator temperature (about
5°C).
•
For a creamier froth, rotate the container w ith slow
movements in an upw ard motion.
•
To avoid milk w ith poor froth or large bubbles,
alw ays clean the spout as described in the follow ing
paragraph.
