44
MAINTENANCE
- Common food items that can soil your oven:
Steaks, broiled / Fish, broiled / Meat roasted at
low temperatures
SpeedClean Instruction Guide
NOTE
• Allow the oven to cool to room temperature
before using the
SpeedClean
cycle. If your oven
cavity is above 150
℉
(65
℃
), the
SpeedClean
cycle will not be activated until the oven cavity
cools down.
• The oven should be level to ensure that the
bottom surface of the oven cavity is entirely
covered by water at the beginning of the
SpeedClean
cycle.
• For best results, use distilled or filtered water.
Tap water may leave mineral deposits on the
oven bottom.
• Soil baked on through several cooking cycles will
be more difficult to remove with the
SpeedClean
cycle.
• Do not open the oven door during the
SpeedClean
cycle. Water will not get hot enough
if the door is opened during the cycle.
1
Remove oven racks and accessories from the
oven.
2
Scrape off and remove any burnt-on debris
with a plastic scraper.
• Suggested plastic scrapers:
- Hard plastic spatula
- Plastic pan scraper
- Plastic paint scraper
- Old credit card
3
If cleaning the upper oven, fill the steam
feeder tank to the maximum fill line with
water, and skip to step 7.
4
Fill a spray bottle (10 oz or 300 ml) with water
and use the spray bottle to thoroughly spray
the inside surfaces of the lower oven.
5
Use at least 1/5 (2 oz or 60 ml) of the water in
the bottle to completely saturate the soil on
both the walls and in the corners of the lower
oven.
6
Spray or pour the remaining water (8 oz or
240 ml) onto the bottom center of the lower
oven cavity. The indentation on the oven
bottom should be fully covered to submerge
all soils. Add water if necessary.
NOTE
• If cleaning multiple ovens, use an entire bottle of
water to clean each oven. Do not spray water
directly on the door. Doing so will result in water
dripping to the floor.
7
Turn the upper or lower Oven Mode knob to
select the Clean mode. Then select
SpeedClean in the display.
8
Touch
Start
. The remaining time appears in
the display.
CAUTION
• Some surfaces may be hot after the
SpeedClean
cycle. Wear rubber gloves while cleaning to
prevent burns.
• During the
SpeedClean
cycle, the oven becomes
hot enough to cause burns. Wait until the cycle is
over before wiping the inside surface of the
oven. Failure to do so may result in burns.
• Avoid leaning or resting on the oven door glass
while cleaning the oven cavity.
9
A tone will sound at the end of the 10-minute
cycle. turn the UPPER or LOWER Oven Mode
knob to the OFF position to clear the display
and end the tone.
us_main.book.book Page 44 Thursday, April 7, 2022 4:25 PM
Summary of Contents for SKSDV3002 Series
