6
5. Refrigerator/Freezer door opening and how to
fix at 90 degrees
6. Installation of part to prevent the product from
falling over
※
Because the built-in product is heavy on the top, the
cabinet must be fixed firmly so that the product does not
move when using it.
• Fix the side of the cabinet to the building wall or side
of the furniture firmly.
• Use the part included in the accessory box as shown
in the picture to fix the cabinet to both sides of the
walls.
• If the part prevent the product from falling over is not
installed in the correct location, the product can fall
over to cause severe injury or death.
※
If the device to keep the refrigerator door
open and fixed cannot be inserted, move
the refrigerator door slowly in left and
right direction to push it in.
Part to prevent product
from falling over x 2
M4*L12 screw x 6
M4*L22 screw x 8
Spare screws may
be included
Push and install the device to keep the
refrigerator door open and fixed, included
in the accessory box, to the hole marked
on the picture completely.
The left and right side are installed in the
same method.
82-3/8”
82-3/8”
(2,092mm)
(2,092mm)
