Select a more intensive program.
See" Wash Cycle Table ".
Rearrange the items so that the sprayer can rotate
freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
Arms".
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam
can escape. Begin unloading the dishwasher only
once the dishes are barely warm by touching.
In short programmes the rinse temperature is lower.
Choose a program with a high rinse temperature.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Dishes block
detergent cup opens.
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
WARNING!
1. If overflow occurs, turn off the main water supply before calling a service.
2. If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
Problem
Possible Causes
What To Do
The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
The dishes
are not clean
Cloudiness
on glassware
Black or gray
marks on dishes
Detergent left in
dispenser cups
The dishes
are not drying
Use more detergent, or change your detergent.
Use less detergent if you have soft water and
select a shortest cycle to wash the glassware and
to get them clean.
Use a mild abrasive cleaner to eliminate those
marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/Refill the rinse-aid
dispenser.
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Item are blocking
the path of spray arms.
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the spray arm jets
get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Improper loading
Too little rinse-aid
Dishes are removed
too soon.
Wrong programme
selection
Using cutlery with
a low-quality coating
-factory
washing
result
Unsatis
-factory
drying
result
Unsatis
-5
Codes
Meanings
Possible Causes
Longer inlet time.
Faucets is not opened, or water intake is restricted, or
water pressure is too low.
E1
E4
Some element of dishwasher leaks .
Overflow.
9
-