SIGNIFY EA0403, Instruction Manual

AFTER SALES SUPPORT

  1300 777 137

service@unclebills.com.au

MODEL: EA0403    PRODUCT CODE: 46486    08/2017

17

been tuned in, press the MEM button on the control panel or remote control (No. 16 

on the control panel diagram or No. 11 on the remote control diagram). Once the MEM 

button has been pressed, “P01” will be displayed on the screen and the“MEM” icon will 

flashing in the bottom right hand corner of the screen. “P01” indicates “Program 1” and 

by pressing the PRE- or PRE+ button on the control panel or remote control (No. 14 and 

15 on the control panel diagram or No. 12 and 18 on the remote control diagram) you can 

select a program number from P01 – P20 to store the station. Select the desired program 

number that you would like to save this station too, and then press the MEM button once 

again; this will save the radio station into the selected program number.

To playback a stored radio station, simply press PRE- or PRE+ button on the control 

panel or remote control (No. 14 and 15 on the control panel diagram or No. 12 and 18 

on the remote control diagram) until you reach the desired program number. The saved 

station will automatically play.

NOTE:

 If the unit is powered OFF by pressing the POWER button (No. 2 on the control 

panel diagram), all saved stations will be lost. For this reason, it is suggested that the 

standby mode is utilised by pressing the ON/OFF button instead (No. 3 on the control 

panel diagram or No. 1 on the remote control), so that all saved stations are retained in 

the Jukebox’s memory.

NOTE:

 All saved radio stations will be lost if the unit is unplugged from the power outlet.

   
Using the CD Player Function

NOTE:

 Before using the CD player, be sure to remove all protective packing material 

from the CD player itself and from over the lens. If these are not removed, the CD player 

will not work.

NOTE:

 Before loading a CD onto the CD player (No. 2 on the Jukebox parts diagram), 

please ensure that the CD player ON/OFF lever 

(No. 1 on the Jukebox parts diagram) is 

in the off position, which allows full access to the CD player.

T

o use the CD player function, firstly open the transparent window by lifting up from the 

bottom of the window (and swing outwards/upwards). The window is connected to the 

Jukebox casing by a hinge at the top (No. 10 on the Jukebox parts diagram). Place the 

CD on the CD player (No. 2 on the Jukebox parts diagram) with the mirror side facing 

down. Ensure that the CD is secured and “clicks” into place. Twist the CD player ON/

Instructions (cont)