ATTENTION: Install in accordance with national and local building and electrical codes
.
!
Page 4
15
16
Endcap Preparation
Install Endcap
“
CLICK
”
14
Tighten Screws
Listen For Click
17
18
Tighten Screws
19
Reinstall Lens and Endcap Plate
Tighten the screws alternating between the
two.
Remove the bottom cover from the endcap.
Install the joiner aligners making sure to keep the small tab toward the bottom.
Slide the endcap over the joiners and onto the joiner bracket.
Listen for a click as the joiner
bracket is located.
Tighten the screws alternating between the
two.
Reinstall the lens and Endcap plate.
