3.2.2 Positioning The Pinch Rollers
Move the pinch rollers manually to the proper position. Make sure that the pinch rollers
are positioned above the grid drums. The white marks on the main beam will help you to
position the pinch rollers easily and correctly (Figure 3.2.2.1).
(Figure 3.2.2.1)
Push the lever backward to lower down the pinch rollers.
Turn on the power, and the carriage will measure the size of the media automatically. After
sizing, the cutting plotter will start to work.
Figure 3.2.2.2 Correct way to move the pinch rollers
Note:
Move the pinch roller by applying force at the rear portion of the pinch
roller support. Do not move it by holding the front rubber roller.
3-4
