5.2.2 Installation of the cutting media
Cutter operating instructions
USER MANUAL
12
This machine is not only suitable for single-sheet media, but also for a roll of media.
5.2.2.1
Press down on the handle of the pinch roller behind the machine to raise the rollers.
5.2.2.2 Insert the media into the space between the pinch rollers and the main shaft, and pull
the media to an appropriate length from the front of the machine.
Using a roll of media
Using a single sheet of media
Pull it out to the required length
Cut the required length for your project
5.2.2.3 Adjust the horizontal position of the pinch roller
according to width of paper. A minimum distance
of 1-10CM is recommended between the pinch
roller and the paper edge to ensure good
performance.
5.2.2.4 Raise both handles of pinch rollers, to
apply
force
to
the
media.