Sigrand IP video cameras, Release 1.0.101
System Start
The System Start event arises upon starting of the camera.
Input Signal
The Input Signal event arises when the corresponing pin of the
con-
nector is closed to the ground.
The front of the pulse is considered as an event.
The Input Signal Number pulldown menu species one of the two available inputs,
1 (pin 14) or 2 (pin 7).
Motion Detector
The Motion Detector event is caused by a motion detection signal.
Note: for motion detection an MJPEG codec is required for one of streams.
Action
The Action pulldown list species one of the available actions:
Output Signal
A logic `1' pulse (about 3.3 V) is applied to Pin 13 of the
connector.
The duration of the pulse is specied in milliseconds by the Output Signal Dura-
tion input eld.
The default state of the output signal is logic `0'.
Play Alarm
An alarm audio signal is applied to the (analog) line output of the camera.
Send Picture
A single JPEG frame is sent to the URL dened by the Destination Address input
eld.
scheme://user:pass@someserver.com/some/path/
where:
scheme - ftp or http URL scheme
user:pass - optional username and password of the server
someserver.com - server address
/some/path - an existing path on the server, where the le
with a JPEG picture will be placed.
The le has a name derived from the time of the shot in the local
timezone:
YYYY-MM-DD_hh-mm-ss-msc.jpeg
54
Chapter 2. User Guide
Summary of Contents for SG-1C-111
