Instruction Manual VisGuard 2
General safety points
22
14162E/2
3
General safety points
3.1
Dangers when properly used
DANGER!
Damaged instrument or cabling.
Touching damaged cables may lead to electrical shocks or death.
The instrument may be operated only when the cables are undamaged.
The instrument may be operated only if it has been properly installed or repaired.
DANGER!
Dangerous voltage inside the instrument.
Touching live components inside the instrument may lead to electric shocks resulting in
death.
The instrument must not be operated when the housing is removed.
DANGER!
Damage to the instrument due to incorrect service voltage.
If the instrument is connected to an incorrect service voltage, the instrument can be da m-
aged.
The instrument may be connected only to voltage sources as specified on the rating
plate.
DANGER!
Missing Instruction Manual after the instrument changes hands.
Operating the instrument without knowledge of the Instruction Manual may lead to injuries
to persons and damage to the instrument.
If the instrument changes hands, always include the Instruction Manual.
If the Instruction Manual is lost, you can request a replacement.
Registered users can download the current version at
CAUTION!
Penetration of moisture as well as condensation on the electrical components du r-
ing servicing duty.
If moisture enters the instrument, the VisGuard 2 can be damaged.
Work on the inside of the instrument may be performed only in a dry room and at room
temperature. The instrument should be at operating or room temperature (avoid con-
densation on optical and electrical surfaces).
CAUTION!
The use of aggressive chemicals when cleaning.
Use of aggressive chemicals can cause damage to instrument components.
Do not use aggressive chemicals or cleaning agents when cleaning.
Should the instrument come in contact with aggressive chemicals, clean it thoroughly
with a neutral cleaning agent.
