Installation Manual
Sigur MR1
28
29
TECHNICAL CHARACTERISTICS
AND CONDITIONS OF USE
8.
Type of identifiers
Reading distance
Output interfaces
Dimensions
Temperature
Dust and water pro. class
Supply voltage
Current consumption at
12 V supply voltage
Indication
Diagnostic tools
Mifare (Ultralight, Classic, Mini, ID, DESFire, Plus,
including Mifare Plus SL3 mode), MasterCard, Visa
contactless bank cards, Smartphones (Android, iOS)
using BLE technology, All ISO14443-A identifiers
4-9 сm depending on the card and the operation mode
Wiegand with customizable packet length of 26, 34,
58 bits and more
90х90х12 mm
from -25 to +60 °C
IP65
9...14 V
90 mA in stand-by mode
130 mA when reading a card
RGB LED light
Broadband sound (PCM 16bit, 44.1kHz, Mono)
3 indication control inputs
Embedded self-check functions
Case opening sensor
7.
To perform hardware reset to default settings:
1. Power the reader off.
2. Close lines Data 0 (green wire) and Beep
(yellow wire).
3. Power up the reader.
READER HARDWARE RESET
