EN - 8
EN
TROUBLESHOOTING
Problem
Cause
Solution
Unusual noise
The attachment is not fitted correctly.
Remove it and reinsert it.
The appliance will not switch on.
The appliance is discharged.
Charge the appliance.
The appliance charging LED is not lit.
The USB cable is not plugged in correctly.
Check the connection of the USB cable to the charging
port and to the AC adapter.
The attachment is not straight.
The attachment is not fitted correctly.
Remove it and reinsert it.
The attachment easily falls out of the appliance.
If the problem is not listed in the table above or if the problem persists, switch off the
appliance, disconnect the plug from the electrical outlet and contact an authorized
service center.
Summary of Contents for SGR-SK-N610W
Page 2: ...ENGLISH 4 DEUTSCH 9 ČESKY 14 SLOVENSKY 19 MAGYAR 24 FRANÇAIS 29 ITALIANO 34 ROMÂNĂ 39 ...
Page 3: ...1 2 3 4 5 6 7 8 9 10 11 12 ...
Page 44: ...44 ...
Page 45: ...45 ...