6-53
6.5.15 Image Command
ESC '*' m nl nh {DATA}
Set Bit Image Mode
Code
1BH 2AH m nl nh {d1 d2•••dk}
m: 0,1,32,33 (mode setting)
0
nh×256
＋
nl
4095
Function Sets the bit image mode and prints bit image.
m indicates the bit image mode.
The bit image modes are related to the set bit images as shown below when the horizontal
image width is 48mm (384 dots).
Vertical Horizontal
m Mode
Dots
Resolution Dots
Resolution
0
8-dot
single-density
8
2.7 dots/mm
192
4 dots/mm
1
8-dot
double-density
8
2.7 dots/mm
384
8 dots/mm
32
24-dot
single-density
24
8 dots/mm
192
4 dots/mm
33
24-dot
double-density
24
8 dots/mm
384
8 dots/mm
If m is not one of the values listed above, ESC '*' m is ignored and the subsequent data will be
processed as normal data.
Only the 4 least significant bits of nh are valid.
Number of dots in the horizontal direction = nl
If nl = nh = 0, the data before nh is ignored, and the following data will be processed as normal
data.
d indicates bit image data. The image data k is as follows:
8-dot bit image: k = (nh
256+nl) bytes
24-dot bit image: k = (nh
256+nl)
3 bytes
If the number of dots in the horizontal direction exceeds the printable area, the excess data is
ignored.
Summary of Contents for DPU-S245
