3-62
HEATER MENU
Use to set the heater delay time and heater standby time. Press
key to change
the heater settings.
(1)
HEATER DELAY TIME
Sets the time before the heater turns off after
printing is completed. (
P.2-25
)
<Parameter (numeral input)>
00 to 30
(2)
HEATER STANDBY TIME
Sets the time that the heater maintains the
standby temperature after printing is com-
pleted. (Transition time to the standby tem-
perature is included) (
P.2-25
)
<Parameter (selection)>
NONE
Does not maintain the standby temperature.
30 min
Maintains the standby temperature for 30 minutes.
60 min
Maintains the standby temperature for 1 hour.
90 min
Maintains the standby temperature for 1 hour and a half.
120 min
Maintains the standby temperature for 2 hours.
CONTINUOUS
Continues to maintain the standby temperature.
key
h
PRINTER
SETUP
i
f
ADJUST
HEATER
g
#HEATER DELAY TIME
>05 min
#HEATER DELAY TIME
>05 min
#HEATER STANDBY TIME
>30 min
Summary of Contents for IP-5520
