4-25
M
ain
te
na
nc
e a
nd A
dj
us
tm
en
t / R
ep
la
ce
m
en
t
4
This section describes [Wiper sponge replacement procedure].
Replace the Wiper sponge when the printer displays the replacement message.
The wiper sponge needs replacement about once every six months as a general
rule.
1
Set the printer to the offline and press
key to display PH.MAIN MENU.
2
Press
key to enter in PH.MAIN MENU2.
Then, the cap cleaning menu is displayed.
3
Select [REPLACE WIPE SPONGE] with
key and press
key.
4
When the confirmation menu appears,
press
key.
5
Open the Front cover and the Cap cover.
6
Raise up a Wipe cleaning liquid bottle
a little and pull out the bottle after
confirming that all liquid flows in the
printer.
Note
-
Visually check that the Waste ink bottle
is empty before removing
Wiper sponge replacement
h
REWIND
FORM FEED
i
f
PH.REC
PH.MAIN
g
#CAP CLEANING
>
#REPLACE WIPE SPONGE
>
1
2
#REPLACE WIPE SPONGE
*
OK ?
OPEN COVER
REPLACE WIPE SPONGE
REPLACE WIPE SPONGE
CLOSE COVER
IP-5610取説_E.indb 25
09.4.3 3:15:15 PM