4-34
A
djustment procedure of [BIDIRECTION1/2/3]
Adjust the bi-direction position of each head. Reading the result of
[BIDIRECTION1], [BIDIRECTION2] and [BIDIRECTION3] print, enter the value.
STEP 1
How to print the adjustment pattern [BIDIRECTION1]
1
Set the printer to the offline. (Press
key.)
2
Press
key twice to display ADJUST.
3
Press
key and then
key to display
the adjustment pattern.
4
Press
key to select [BIDIRECTION1].
Then, press
key.
When adjusting [NORMAL2] print mode, select [BIDIRECTION2]
and adjusting [FINE DRAFT]
print mode, select [BIDIRECTION3].
5
Press
key. Then, the adjustment
pattern in the figure shown below is
printed.
#TEST PRINTS
*
EXECUTING
#TEST PRINTS
*
BIDIREC TION1
#TEST PRINTS
*
NOZZLE PRINT
h
PRINTER
SETUP
i
f
ADJUST
HEATER
g
h
INK
MEDIA REG
i
f
MEDIA
M.ADV
g
-1
+31
-32
0
-31
+1
-30
+2
-29
+3
-28
+4
media adv
anc
e dir
ec
tion
[BIDIRECTION] print sample
IP-5610取説_E.indb 34
09.4.3 3:15:22 PM