52
53
Loading the media
Loading the media
5
①
②
Remove the left side first.
1 Turn the media jack’s handle clockwise to raise the
media lifter to the level of the media.
2 When the jack supports the media, slide the left media
holder to remove it from the media roll.
Note
Do not raise the media jack too high when the media is
still installed on the media holder. Doing so may damage
the media holder or the media jack.
6
Place the left side of the media on the media
stand.
1 Install the media stand next to the jack.
2 Turn the media jack’s handle counter-clockwise to lower
the media until it is supported by the stand.
7
Slide the media jack and install it to the right
side.
8
①
②
Next, remove the right side.
1 Turn the media jack’s handle clockwise to raise the
media lifter to the level of the media.
2 When the jack supports the media, slide the right media
holder to remove it from the media roll.
Note
Do not raise the media jack too high when the media is
still installed on the media holder. Doing so may damage
the media holder or the media jack.
9
Turn the media jack’s handle counter-
clockwise to lower the media, and then
remove the media.
Notes
The media is heavy. Always use two or more people when handling roll media to prevent injury, such as when the
media fall over someone’s feet. Also, if you feel that the media is too heavy, take measures to handle it properly such
as increasing the number of people carrying out the operation. Incorrect handling of the media may lead to personal
injury.
To prevent injuries, use a dolly equipped with a lifter (recommended dolly) when loading, removing or replacing the
media.
Procedure to remove the roll media (feed side)
1
Lift the pressure roller lever.
2
Rotate the flange to rewind the media.
3
Move both the right and left flanges to
remove them from the tube, and then remove
the media.
Notes
If a lot of media remains and the roll is heavy, use tools
to help you and remove the media using the loading
procedure in the reverse order.
Be careful that the media does not fall when removing
the media holders from the roll. Workers may be injured
if their hands get caught under the media or if the media
falls on their feet.
Be
fo
re
p
rin
tin
g
Lo
adi
ng
the
m
edi
a
A
dj
us
tm
ent
M
ai
nt
enan
ce
A
dv
an
ce
d
op
er
ati
on
s
Trou
ble
sh
oo
tin
g
M
enu
tr
ee
Ap
pe
nd
ix
Summary of Contents for IP-6620
Page 112: ...222 ...
