52
#BACK ADJUST VAL
>XX:+0000PULSE
Set the back adjust value of media. This value is used to correct the splice of two images divided by the auto-
cleaning (PH CLEANING [MODE2] performed during printing.
#BIDIR ADJ1 L XXX
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (MAX SPEED and HIGH SPEED) are set.
#BIDIR ADJ1 R XXX
>XX:+00
#BIDIR ADJ2 L XXX
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (NORMAL) are set.
#BIDIR ADJ2 R XXX
>XX:+00
#BIDIR ADJ3 L XXX
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (HIGH QUALITY) are set.
#BIDIR ADJ3 R XXX
>XX:+00
#BIDIR ADJ4 L XXX
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (MAX QUALITY) are set.
#BIDIR ADJ4 R XXX
>XX:+00
#REMAINING MEDIA
>XX:YYYm
Set the remaining media. When the remaining media is set beforehand, you can check the remaining media (by
subtracting the printed length) in the MEDIA MENU.
#DELETE MEDIA
>02:TYPE02 OK?
Delete the registered media. No. 01 to 20 of registered media can be selected.
#COPY MEDIA
>XX
Select the media number of copy source. Use this menu to copy the media information (parameters) of the
registered media to other media. Designate the copy destination in [PASTE MEDIA].
#PASTE MEDIA
>01
à
02*
Select the media number of copy destination.
M.ADV MENU
Menu
Outline of functions
#SING. ADV
#EXECUTE
To determine the media advance value, print the media advance correction pattern with the current value.
Then set the adjustment value.
#AUTO BIDIR ADJUST
#EXECUTE
Print a bidirectional print position adjustment pattern and enter the correction value. Then all the correction
value can be set automatically.
#MULTI ADV
#EXECUTE
To determine the media advance value, print three media advance correction patterns centered on the current
value. Then set the adjustment value.
#MANUAL BIDIR ADJUST
#EXECUTE
Print a bidirectional print position adjustment pattern for each print mode and set the correction value.
#
BACK
#EXECUTE
Print the back correction pattern and set the back correction value.
REWIND MENU
Menu
Outline of functions
REWINDING MEDIA
While you keep pressing the
key, the printer rewinds media.
PH.REC MENU
Menu
Outline of functions
#PH RECOVERY
>NORMAL
This menu is used to clean the print head of the printer. Press the
key to enter PH.REC MENU for the print
head.
FORM FEED MENU
Menu
Outline of functions
FEEDING MEDIA
While you keep pressing the
key, the printer feeds media. (When cut-sheet media is used, the printer ejects
the media.)
PH.MAIN MENU
Menu
Outline of functions
#CAP CLEANING
>
The carriage moves to the maintenance area so that the capping unit can be cleaned periodically.
#INK SYSTEM OPT
>STORE INK SYS
Execute the service (cleaning) operation.
#COLOR CHANGE (8->4)
>
Used to change the printer mode from 8-color mode to 4-color mode or from 4-color mode to 8-color mode.
