43
Removing Partition Plate
Follow the below procedure to remove the partition plate from the printer.
(1)
Pull up the portion of the partition plate "h" with pressing in the direction of the arrow as shown in the
figure below.
Figure 13-7 Partition Plate Removing
NOTE
◆
The printer has two paper cutters on the paper outlet: one is on the printer side, and the
other is on the paper cover side. When installing / removing the partition plate, be
careful not to cut your fingers by the paper cutter.
◆
Set the paper width before using the printer for the first time. DO NOT change the paper
width after starting to use the printer. Doing so may damage the printer.
◆
When the smaller than 112mm width thermal paper is used with the partition plate,
rubber crumbs of the platen may be generated because the platen contacts with the
thermal head. Remove rubber crumbs regularly to maintain printing quality.
h