~ 4 ~
Front Panel — Transmitting Unit AV-GM02R3-S1-TX
MODE: 0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output
1 = [Video] – supports up to HDMI 1.3 output. [Audio] – locks to stereo audio output
2 = [Video] – locks to HDMI 1.2 output. [Audio] – supports up to 7.1ch output
3 = [Video] – locks to HDMI 1.2 output. [Audio] – locks to stereo audio output
4 = [Video] – DVI display mode. [Audio] – no audio output
5 = [Safe Mode] – uses default EDID
1
with video supported up to 1080p and stereo
audio
6 = [Default Mode] – uses default EDID
2
with video supported up to 1080p and 7.1ch
audio
7 = [EDID Learning Mode] – learns EDID
3
from the display
Note for EDID (Extended Display Identification Data) learning
1. Please connect the display which you want to read EDID with a HDMI cable to the
transmitter’s HDMI-IN and turn Mode to 7 so the TX can learn the EDID information from
the connected HDTV. The LED on the RJ45-OUT of TX will dim and light again in a few
seconds, which indicates the EDID learning process is completed.
2. Turn Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable audio setting and
enjoy the experience. DO NOT let the rotary arrow pass by Mode 6 which will erase the
EDID just learned and restore the default EDID.
3. If use Mode 6 EDID(1080p),turn Mode clockwise from Mode 6 to Mode 0~4.
If use Mode 5 EDID(1080p),turn Mode anticlockwise from Mode 5 to Mode 0~4
Panel Descriptions
