3
PANEL DESCRIPTIONS
Transmitting unit
►
AV-GM03S3-S1-TX
Front Panel
1.
RS-232: connect to a RS-232 signal source or receiver
2.
IR-Blaster: connect to IR blaster for IR pass-through from RX to TX
3.
Stereo IN: connect to analog audio source
4.
S/PDIF IN: connect to digital audio source
5.
Push-in button: select between S/PDIF and analog stereo audio [button down-S/PDIF, button
up-Stereo]
6.
VGA IN: connect to a VGA input source or a component video source via a VGA-component break
cable
7.
IR-Receiver: connect to IR receiver for IR pass-through from TX to RX
Rear Panel
8. +5V DC: inter-locked power jack to connect to 5V DC power supply unit
9. Local VGA: VGA loop-out to a local VGA display or component video display via a
