4
5.
+5V DC: Connect to 5V DC power supply
6.
A/V SIGNAL: Plug in a Cat-5/5e/6 cable that needs to be linked to the A/V SIGNAL port of the
receiving unit
7.
CTRL CHANNEL: Plug in a Cat-5/5e/6 cable that needs to be linked to the CTRL CHANNEL port of
the receiving unit
Receiving unit
►
AV-GM04D3-S1-RX
Front Panel
8.
IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
9.
IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
10.
HDMI OUT: Connect to a HDMI display with a HDMI male-male cable here
11.
Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI
signal level varies from strongest to weakest for respective transmission length from longest
possible range to short distance. Please adjust the signal level from weakest to strongest and
stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate
signal level setting may cause overpowering issue that would shorten the product life
significantly!
Mode
Strongest EQ to Weakest EQ
TX&RX Extender Mode –
TxD1 of AV-GM04D3-S1-TX is connected to TxD of
AV-GM04D3-S1-RX
RxD2 of AV-GM04D3-S1-TX is connected to RxD of
AV-GM04D3-S1-RX
0 > 1 > 2 >3 > 4 > 5 > 6 > 7
Master to Slave Mode –
TxD of AV-GM04D3-S1-TX is connected to RxD of
8 > 9 > A >B > C > D > E > F
