4
PANEL DESCRIPTIONS
Transmitting unit
►
AV-GM04G3-S1-U-TX
Front Panel
1.
USB[Host]: Connect to a USB port from the computer for keyboard & mouse control
2.
RS-232:Connect to serial port device with a DSUB-9 male-male or male-female cable
here
3.
Mini USB: F/W update
4.
Dip Switch
[Pin 1]: F/W update mode
OFF [
] – Normal; ON [
] – FW update
[Pin 2]: Reserved
5.
LED indicator
[Red]: Power LED indicator
[Green]: Link LED indicator
6.
SFP OUT: Plug in single mode fiber optic cables that needs to be linked to the receiving
unit AV-GM04G3-S1-U-RX
Rear Panel
7.
HDMI IN:Connect to a HDMI source with a HDMI male-male cable
8.
IR Receiver:Infrared 3.5mm socket for plugging in the extension cable of IR receiver
9.
IR Blaster:Infrared 3.5mm socket for plugging in the extension cable of IR blaster
