4
8.
LED Indicator: Power and signal LED indicator
9.
HDMI LOOPOUT: Connect to a HDMI display with a HDMI male-male cable.
10.
Dip Switch: Video channel setting (Please refer to “Notes”)
11.
HDMI Signal OUT: RJ-45 Network connector
Receiving unit
►
AV-GM04Q3-S1-RX
Front Panel
12.
LED Indicator: Power and signal LED indicator
13.
IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
14.
HDMI OUT: Connect to a HDMI display with a HDMI male-male cable.
15.
S/PDIF Output (TOSLINK)
16.
Stereo Output (3.5mm)
Rear Panel
17.
+5V DC: Connect to 5V DC power supply (optional)
18.
RS-232: Connect to PC serial port with a DSUB-9 male-male cable here
19.
Mini USB: for F/W update
20.
HDMI Signal IN: RJ-45 Network connector
Notes: TX group ID dip-switch setting
1.
For ID=1~63, please refer the table below to set up (Hardware control)
2.
For ID=64~1063, please adjust the DIP switch to ID=0, and the real ID can be decided by
the external software (Software control)
