6
NOTICE
1. While connecting a new monitor to the splitter, experiencing a short period of time no display
may be expected. Automatic EDID learning will analyze the newly connected monitor to see if
the EDID for the DVI input is necessary to update!
2. For long range high definition DVI transmission applications, please adopt CAT5/6 cable based
DVI extenders.
3. For firmware update through USB, users MUST turn the power off, press the push button until
users power on device, and then connect the USB cable between PC and device. Open the
firmware update software,
[1]
set the correct com port and baud rate (57600 is recommended),
[2]
click the “File” button to direct to the firmware HEX or BIN file and press “Program MCU”
symbol to firmware update. Once update process is done, please power off the device.
