background image

 

6

 

WARRANTY 

The  SELLER  warrants  the  AV-GM0543-S1 

1x4  DVI  Distribution  Amplifier  with  HDCP 

Support

 to be free from defects in the material and workmanship for 3 years from the date 

of purchase from the SELLER or an authorized dealer. Should this product fail to be in good 
working order within 3 years warranty period, The SELLER, at its option, repair or replace 
the unit, provided that the unit has not been subjected to accident, disaster, abuse or any 
unauthorized  modifications  including  static  discharge and power  surges.  This  warranty  is 
offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the 
warranty seal on the metal housing is broken. 

Unit that fails under conditions other than those covered will be repaired at the current 

price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 
days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers 
agree  to  insure  the  unit  or  assume  the  risk  of  loss  or  damage  in  transit.  Under  no 
circumstances will a unit be accepted without a return authorization number. 

The warranty is in lieu of all other warranties expressed or implied, including without 

limitations,  any  other  implied  warranty  or  fitness  or  merchantability  for  any  particular 
purpose, all of which are expressly disclaimed.   

Proof  of  sale may be required in order  to claim warranty.  Customers  outside Taiwan 

are responsible for shipping charges to and from the SELLER. Cables and power adapters 
are limited to a 30 day warranty and must be free from any markings, scratches, and neatly 
coiled.   

The content of this manual has been carefully checked and is believed to be accurate. 

However, The SELLER assumes no responsibility for any inaccuracies that may be contained 

in  this  manual.  The  SELLER  will  NOT  be  liable  for  direct,  indirect,  incidental,  special,  or 

consequential  damages  resulting  from  any  defect  or  omission  in  this  manual,  even  if 

advised of the possibility of such damages. Also, the technical information contained herein 

regarding  the  AV-GM0543-S1  features  and  specifications  is  subject  to  change  without 

further notice. 

 

 
 
 
 
 
 
 
 
 
 
 
April, 2018 

Support 

For more info or tech support 

http://www.siig.com/support 

Summary of Contents for AV-GM0543-S1









Reviews: