background image

~ 8 ~ 

 

 

The SELLER  warrants  the  AV-GM05Q3-S1 1x4 HDMI Splitter  with  Dedicated CEC  to be  free 

from defects in the material and workmanship for 3 years from the date of purchase from the 
SELLER or an authorized dealer. Should this product fail  to be in good working order within  3 
years warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit 
has not been subjected to accident, disaster, abuse or any unauthorized modifications including 
static  discharge  and  power  surges.  This  warranty  is  offered  by  the  SELLER  for  its  BUYER  with 
direct transaction only. This warranty is void if the warranty seal on the metal housing is broken. 

Unit that fails under conditions other than those covered will be repaired at the current price 

of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the 
day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the 
unit  or  assume  the  risk  of  loss  or  damage  in  transit.  Under  no  circumstances  will  a  unit  be 
accepted without a return authorization number. 

The  warranty  is  in  lieu  of  all  other  warranties  expressed  or  implied,  including  without 

limitations, any other implied warranty or fitness or merchantability for any particular purpose, 
all of which are expressly disclaimed.   

Proof  of  sale  may  be  required  in  order  to  claim  warranty.  Customers  outside  Taiwan  are 

responsible for shipping charges to and from the SELLER. Cables and power adapters are limited 
to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.   

The  content  of  this  manual  has  been  carefully  checked  and  is  believed  to  be  accurate. 

However, The SELLER

 

assumes no responsibility for any inaccuracies that may be contained in 

this  manual.  The  SELLER  will  NOT  be  liable  for  direct,  indirect,  incidental,  special,  or 
consequential damages resulting from any defect or omission in this manual, even if advised of 
the possibility of such damages. Also, the technical information contained herein regarding the 
AV-GM05Q3-S1 features and specifications is subject to change without further notice.

 

 

 
 
 
 
 
 

Limited Warranty

 

Summary of Contents for AV-GM05Q3-S1











Reviews: