5
SWITCH SETTING
Left Position
Right Position
SW5
HDMI 1.3
HDMI 1.2
SW4
EDID Multi Ch
EDID 2 Ch
SW3
EDID Full HD
EDID HD
SW2
EDID default
EDID use HDMI Out 4
SW1
Input1
Input2
EDID LEARNING
1. Power up the AV-GM06K3-S1. Connect to HDMI OUT 4 with the display you want the
AV-GM06K3-S1 to learn its EDID.
2. The AV-GM06K3-S1 is only bound to learn the EDID from the display for the HDMI source device
connected to HDMI OUT 4.
3. To learn the display’s EDID for source device connected to HDMI OUT 4, Set SW2 to Right
Position. Power on and wait for about 5 seconds to complete the EDID learning process. You
DON’T NEED to pull up the SW1 switch again unless you want to learn another display’s EDID by
pulling both DIP switch SW1 one more time.
HDMI PIN DEFINITION
Type A (Receptacle) HDMI
Pin 1 TMDS Data2+
Pin 8 TMDS Data0 Shield Pin 14 Reserved (N.C. on device)
Pin 2 TMDS Data2 Shield
Pin 9 TMDS Data0–
Pin 15 SCL
