4
•
DC 5V
: DC 5V power jack. Plug the included power
adapter here
•
IR
: Connect to the included IR receiver cable
•
RESET
: Use the fine end of any object to press and
hold the bottom to return to default settings
•
PWR
: LED indicator for power status. On/Off when
the
Receiver
is powered on/off
•
LINK
: LED indicator for link status. On when the
connection of
Transmitter
and
Receiver/Repeater
is
established and detected
•
RS-232:
RS-232 control port. Plug the included
3.5mm to RS-232 cable then an RS-232 cable here, if
needed
•
DP OUT
: DisplayPort signal output port. Connect
this port to the remote DisplayPort display by using
a DisplayPort cable (not included)
•
: Audio output port. Connect to the a remote
3.5mm audio speaker by using the included audio
cable
•
LINE 1-3
: Signal input port, connected with
Transmitter
's
LINE
port by using a CAT X cable (not
included).
Either one port is connected to the
Transmitter
unit,
the other two ports could be connected to other
Receivers/Repeaters
for further signal extension or
expansion. See the Function Diagram section on
page 7-10 for more details
