6
Button View
Mode
On Open EQ. Less noise but more power consumption.
1
Off Close
EQ.
On Writing default EDID.
*
Set the DIP switch at on and plug in power cord. The green LED will light after the writing process
is completed.
2
Off Record EDID of the connected display via DVI-OUT1
*
Plug in DVI cable first from the display and then plug in power cord. The recording process will be
initiated and the green LED lights. The green LED will turn of after the reading process is
completed.
Warning!! Don’t plug in DVI source while the 3-Port DVI Splitter is writing
default EDID or recording EDID from displays. This will cause damage to
the EDID in the flesh memory.
If you cannot boot your computer from the connected 3-Port DVI Splitter
due to the damaged EDID in the 3-Port DVI Splitter, please proceed the
“Writing default EDID” and then “Recording EDID of the connected
display”. This will enforce the 3-Port DVI Splitter to write the EDID from
display.
Summary of Contents for CE-DV0031-S1
Page 1: ...3 Port DVI Splitter CE DV0031 S1 Quick Installation Guide ...
Page 9: ...9 Blank Page ...
Page 10: ...10 Blank Page ...
Page 12: ...12 ...