background image

11

Technical Support and Warranty

QUESTIONS?

  SIIG

Online Support

 has answers!  Simply visit our web site

at 

www.siig.com

 and click 

Support

. Our online support database is updated

daily with new drivers and solutions.  Answers to your questions could be

just a few clicks away.  You can also submit questions online and a technical

support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product.  This warranty

covers the original purchaser and guarantees the product to be free of any

defects in materials or workmanship for two (2) years from the date of

purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or

product having similar features and functionality) the product if defective in

materials or workmanship.  This warranty gives you specific legal rights, and

you may also have other rights which vary from state to state.  Please see our

web site for more warranty details.
If you encounter any problems with this product, please follow the procedures

below.
A)  If it is within the store's return policy period, please return the product

to the store where you purchased it.
B)  If your purchase has passed the store's return policy period, please follow

these steps to have the product repaired or replaced.

Step 1:

  Submit your RMA request. Go to 

www.siig.com

, click 

Support

,

then 

Request A Product Replacement

 to submit a request to SIIG RMA

or fax a request to 510-657-5962.  Your RMA request will be processed,

if the product is determined to be defective, an RMA

 

number

 

will be

issued.

Step 2:

  After obtaining an RMA number, ship the product.

Properly pack the product for shipping.  All software, cable(s) and any

other accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package.

SIIG will refuse to accept any shipping package, and will not be

responsible for a product returned without an RMA number posted

on the outside of the shipping carton.

You are responsible for the cost of shipping to SIIG.  Ship the product

to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S.

and International Economy outside of the U.S. at no cost to the

customer.

Summary of Contents for CE-H21U11-S1













Reviews: