3
•
HDMI IN
: HDMI signal input port. Connect this
port to your HDMI source device by using an HDMI
cable (not included)
•
LINE
: Signal output port, connected with
Receiver
's
LINE
port by using a CAT X cable (not included)
•
IR
: Connect to the included IR blaster cable
Receiver/Repeater Unit (Rx)
Figure 2: Receiver/Repeater side panel
•
DC 5V
: DC 5V power jack. Plug the included power
adapter here
•
IR
: Connect to the included IR receiver cable
•
PWR
: LED indicator for power status. On/Off when
the
Receiver/Repeater
is powered on/off
•
LINK
: LED indicator for link status. On when the
connection between
Transmitter
and
Receiver
is
established
•
HDMI OUT
: HDMI signal output port. Connect
this port to the remote HDMI display by using an
HDMI cable (not included)
•
LINE
: Signal input port, connected with
Transmitter
's
LINE
port by using a CAT X cable (not included)
