10
Notice
•
Wireless signals transmitted through walls, glass,
brick or other solid objects will cause signal loss
and decrease the transmission distance
•
It's recommended that the distance between
two receivers not less than 3 meters
•
DO NOT
expose the
unit
to rain, moisture, or
liquids
•
DO NOT
open the housing, doing so will void the
warranty and may cause personal injury due to
electronic hazard
•
DO NOT
plug-in or take-out the IR extension
cables when the
unit
is powered on
FAQ & Solutions
Q:
The transmitter unit and receiver unit can't
connect with each other:
A:
1) Please check that both transmitter and receiver
are powered on.
2) Please check the input channel of the
transmitter and output channel of the receiver
are the same.
3) Please check if there is HDMI signal input from
the Transmitter (TX) unit.
4) Use different HDMI cables.
Q:
The display is not clear or stable:
A:
1) Check the HDMI cable lengths are within 5m.
2) Check the transmission distance is within 50m.
3) Remove other wireless signals and move any
obstacles that are blocking the signal.
4) Decrease the distance between the transmitter
unit and the receiver unit.
