Features
• HDMI 1.3 & HDCP 1.2 compliant
• Build-in EDID, the highest resolution is
1080p@60Hz
• Support one to one or one to many
• The transmission distance is up to 120m
• IR passback supports 20-60KHz wide
frequency
• Compatible with IEEE-568B Cat5e/6 cables
• Support 2.0 stereo audio
Package contents
1. HDMI Transmitter
2. HDMI Receiver
3. IR blaster (IR out) cable
4. IR receiver (IR IN) cable
5. Power adapter 5V/1A x2
6. Quick start guide
Dear Valued Customer
(Just WANTED YOU TO KNOW)
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
Layout
TX transmitter
1 Power indicator LED turns on when power on
2 Data indicator
Blink when data is transmitted
3 Connection
indicator
LED turns on when the transmitter
connects to the receiver, otherwise
it remains off
4 Reset
Restart the device
5 Power input
Connect with power adapter 5V/1A
6 RJ-45 port
Connect with Cat5e/6 cable
7 IR blaster
Connect with IR blaster cable
Please put the IR blaster close to
source device to better transmit the
IR signal from receiver
8 HDMI output
HDMI source local loop-out
9 HDMI input
Connect with HDMI source
RX receiver
DC 5V
HDbitT TX
HDMI OUT
HDMI IN
RESET
RESET
DC 5V
HDbitT RX
HDMI OUT
1 Power indicator LED turns on when power on
2 Data indicator
Blink when data is transmitted
3 Connection
indicator
LED turns on when the transmitter
connects to the receiver, otherwise
it remains off
4 Reset
Restart the device
5 Power input
Connect with power adapter 5V/1A
6 RJ-45 port
Connect with Cat5e/6 cable
7 IR receiver
Connect with IR receiver cable
Please make sure the remote control
is within the required range of IR
receiver
8 HDMI output
Connect with HDMI display
9 HDMI input
Connect with HDMI source
