background image

2

Safety and Notice

The device has been tested for conformance to safety regulations and 
requirements, and has been certified for international use. However, 
like all electronic equipment, the device should be used with care. 
Please read and follow the safety instructions to protect yourself from 
possible injury and to minimize the risk of damage to the unit.

•  Follow all instructions and warnings marked on this unit.
•  Do not attempt to service this unit yourself, except where  
  explained in this manual.
•  Provide proper ventilation and air circulation and do not use near water.
•  Keep objects that might damage the device and assure that the    
  placement of this unit is on a stable surface.
•  Use only the power adapter and power cords and connection  

 

  cables designed for this unit.
•  Do not use liquid or aerosol cleaners to clean this unit. 
•  Always unplug the power to the device before cleaning.

Package contents

•  HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender
•  Receiver x3
•  Power adapter DC 12V / 7.5A
•  IR blaster x1 / IR Receiver x3 
•  Terminal block x4
•  Mounting kit
•  User Manual

Summary of Contents for CE-H24N11-S1









Reviews: