SIIG Cool USB 2.0/eSATA to SATA Docking Duplicator, Quick Installation Manual

4

Using the  SATA Docking Duplicator

Because of the heat generated, be careful not to touch the

hard disk drive(s) while in use.  Do not remove or insert

a hard disk drive when the 

Cool USB 2.0/eSATA to SATA

Docking Duplicator

 is powered on.

Windows

Connecting to USB

One or two additional drive icons will appear in

Computer

 or 

My Computer

 when the 

Cool USB 2.0/

eSATA to SATA Docking Duplicator

 is plugged into a USB

port.  The drive(s) act just like a conventional hard drive

in your system.

Connecting to eSATA

eSATA controllers with port multiplication support

will add a drive icon in 

Computer

 or 

My Computer

 for

each hard disk drive installed into the 

Cool USB 2.0/

eSATA to SATA Docking Duplicator

, otherwise, only one

drive icon will be added.  Please consult your system

manufacturer for more details.

Disconnecting from USB

Before unplugging the 

Cool USB 2.0/eSATA to SATA

Docking Duplicator 

from the computer, it must first be

stopped, by using Windows' 

Safely Remove Hardware

utility.  Follow the steps for your version of Windows.

The same rule applies when turning off the 

Cool USB 2.0/

eSATA to SATA Docking Duplicator

.

Not following the

instructions may result in data corruption, data loss or

damage to the hard disk drive

.