8
Windows Disk Management
When installing a brand new hard disk drive or a blank
hard disk drive into the
Cool USB 2.0/eSATA to SATA
Docking Duplicator
, use Windows' Disk Management
utility to prepare it for use. Please visit Microsoft
support site at, http://support.microsoft.com/kb/
309000, for help and instructions.
Troubleshooting
eSATA
•
If you are experiencing problems with eSATA,
please make sure to use fully compatible eSATA II
ports with full support for port multiplier function
and have installed the most up to date drivers.
•
Switch on the
Cool USB 2.0/eSATA to SATA Docking
Duplicator
only after the system has fully booted
up and follow the installation procedure as
described in this manual.
•
In case the
Cool USB 2.0/eSATA to SATA Docking
Duplicator
is not automatically detected by your
Windows system, the drivers and computer
hardware may not support eSATA hot-plug
function correctly. In this case try to update your
hardware drivers or to boot with the
Cool USB 2.0/
eSATA to SATA Docking Duplicator
and HDD
connected and turned on. If this doesn't help, go to
Device Manager and select
Scan for New
Hardware
.
Summary of Contents for Cool USB 2.0/eSATA to SATA Docking Duplicator
Page 10: ...10 Blank Page ...
