SIIG FireWire 3-Port CardBus, Quick Installation Manual

4

Ulead VideoStudio Software Installation

The 

FireWire 3-Port Cardbus 

includes Ulead

®

 VideoStudio

TM

digital video editing software for producing home videos,

complete with attractive titles, transitions and sounds.

Before installing VideoStudio, make sure your adapter

and DV camcorder are properly installed and configured.

See next section, 

Connecting DV Camcorder

,

for more

details on how to properly install your DV camcorder.
1.

Insert the Ulead VideoStudio DV software CD.

Auto-run should start automatically.  If not, click

Start

, 

Run

, type 

X:\Autorun.exe

, then click 

OK

.

(Replace 

X:

 with the drive letter of your CD-ROM)

2.

Choose 

Install Ulead VideoStudio

 and follow the

onscreen instructions to complete the installation.

Note:  

For instructions on how to use 

Ulead

VideoStudio

, please refer to 

VStudio.pdf

 file

located in the 

Document\Manual

 directory on the

Ulead VideoStudio DV editing software CD.

Connecting a DV Camcorder

Before setting up the digital video camcorder, verify the

FireWire 3-Port CardBus 

driver has been successfully

installed in your system, then follow the procedures

below.
1.

Boot up your system.

2.

Connect the 4-pin connector of the provided

FireWire (1394a) DV cable to your camcorder.

3.

Connect the 6-pin connector to the FireWire (1394a)

port.

4.

Power on the camcorder.  The camcorder should

now appear in 

Device Manager

.