10
FAQ & Solutions
Q: The HDMI display doesn't display images:
A: Check the LED indicators' status to make sure all
connections are connected properly.
If the status is abnormal, check the followings:
1) Whether the power adapter is connected to
theTransmitter (TX) or Receiver (RX) securely.
2) Make sure the Network cable (CAT5e/6) is
firmlyconnected between TX and RX.
3) Make sure the HDMI cables are securely
connected.
- Between the HDMI source and the TX.
- Between the HDMI display and the RX.
Q: The LED Indicator (3) is flashing and there is no
image on the HDMI display:
A: Check if the HDMI display has been switched to
the right HDMI input channel.
Q: The Link LED (2) is flashing and LED Indicator (3) is
off:
A: 1) Check whether there is HDMI signal from HDMI
source.
2) Check whether the HDMI cable is securely
connected between the RX and HDMI display.
Q: The HDMI display is flashing and having
disturbance.
A: Try other HDMI cables to connect the HDMI source
to the TX.
