background image

23

Technical Support and Warranty

QUESTIONS?

  SIIG

Online Support

 has answers!  Simply visit our web site at 

www.

siig.com

 and click 

Support

.  Our online support database is updated daily with new 

drivers and solutions.  Answers to your questions could be just a few clicks away.  You 

can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a three-year manufacturer warranty with this product.  This warranty covers 

the original purchaser and guarantees the product to be free of any defects in materials 

or workmanship for three(3) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having 

similar features and functionality) the product if defective in materials or workmanship.  

This warranty gives you specific legal rights, and you may also have other rights which 

vary from state to state.  Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store 

where you purchased from. 
B) If your purchase has passed the store's return policy period, please follow the steps 

below to have the product repaired or replaced.

Step 1:

  Submit your RMA request.

Go to 

www.siig.com

, click 

Support

, then 

REQUEST A PRODUCT 

REPLACEMENT 

to submit a request to SIIG RMA or fax a request to 510-657-5962.  

Your RMA request will be processed, if the product is determined to be defective, 

an RMA

 

number

 

will be issued.

Step 2:

  After obtaining an RMA number, ship the product.

•  Properly pack the product for shipping.  All accessories that came with the 

original package must be included.

•  Clearly write your RMA number on the top of the returned package.  SIIG 

will refuse to accept any shipping package, and will not be responsible for 

a product returned without an RMA number posted on the outside of the 

shipping carton.

•  You are responsible for the cost of shipping to SIIG.  Ship the product to the 

following address:

SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #: 

•  SIIG will ship the repaired or replaced product via Ground in the U.S. and 

International Economy outside of the U.S. at no cost to the customer.

Summary of Contents for ID-SB0111-S1

























Reviews: