3
2.
Unplug the power cord and remove your computer's
cover.
3.
Remove the slot bracket from an available PCI slot.
4.
Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5.
Replace the slot bracket screw to secure the card.
6.
Replace the computer cover and reconnect the power
cord.
Software Installation
This section provides the steps on how to install the
2-Port Serial 550-Value
drivers. Please make sure the board
is installed before proceeding with the driver installation.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server
2008 R2
1.
Install the board and boot up Windows.
2.
Right click
Computer
, click
Manage
, click
Device
Manager
.
3.
Insert the driver CD. Close the
AutoPlay
box if
prompted.
4.
Right click
PCI Serial Port
listed first, click
Update
Driver Software
.
5.
Click
Browse my computer for updated software
.
For 32-bit
: Type
D:\32bit
, click
Next
. (Change
D:
to
match your CD-ROM drive letter)
For 64-bit
: Type
D:\64bit
, click
Next
. (Change
D:
to
match your CD-ROM drive letter)
6.
At
Windows has successfully updated your driver
software
, click
Close
.
Summary of Contents for JJ-P20511-S3
Page 10: ...10 Blank Page ...
