4
6.
Replace the slot bracket holding screw to
secure the card.
7.
Connect the system power supply to the
cards's
SATA power connector
. (This
connection is optional.)
8.
Replace the computer cover and reconnect
the power cord.
Driver Installation
Note: For Windows 8, the driver is already
embedded in the operating system. So no
additional installation steps are needed.
Windows 7 (32-/64-bit) / Vista (32-/64-bit) /
2008 R2
1.
Install the card and boot up Windows.
2.
For Windows Vista, click
Cancel
at the
Found New Hardware.
For other OS, go directly to step 3.
3.
Insert the driver CD.
For Windows 7 / 2008 R2:
At the CD AutoPlay
box, click
Open folder to view files
, then
double click
Setup
.
