SIIG LB-US0314-S1 Installation Manual Download

Page: 3 / 4

Replace the slot bracket holding screw to

secure the card.

Required:

Connect the system power

supply to the card's

4-pin power

connector

. This connection is required.

8. Replace the computer cover and

reconnect the power cord.

Windows Driver Installation

Windows 10 and 8.x have built-in driver

support for this adapter. Just install the board

and Windows will automatically detect and

install the correct drivers for it. No additional

driver is needed.

For earlier versions, follow below instructions

to install the driver:

1. Download the driver from www.siig.

com, search driver downloads using part

number LB-US0314-S1.

Extract the ZIP file, browse the folder,

then run

RENESAS-USB3-Host-Driver-...-

setup.exe

Summary of Contents for LB-US0314-S1

Page 1: ...s connector PCI Express x1 Version PCI Express 2 0 Data transfer rate Up to 5Gbps USB power output Up to 900mA System Requirements Desktop PC with one available PCIe slot Windows 10 32 64 bit 8 x 32 6...

Page 2: ...s Avoid any contact with internal parts and handle cards only by their external edges 1 Turn OFF the power to your computer and any other connected peripheral devices 2 Unplug the power cord from the...

Page 3: ...tion Windows 10 and 8 x have built in driver support for this adapter Just install the board and Windows will automatically detect and install the correct drivers for it No additional driver is needed...

Page 4: ...omputer 5 Now it s ready for use To Verify Installation 1 Right click This PC Computer or My computer on the desktop click Manage then click Device Manager 2 Double click Universal Serial Bus controll...