16
(Default)
Y
Prompt result messages.
N
Don't prompt result messages.
?
Inquire the current setting.
RECONNE-
CT=
Used to re-connect the lost link for the Master adapter.
?
Inquire the current setting.
(Default)
N
Re-connect is disable
Y
Re-connect is Enable
ROLE=
Used to specify whether the adapter is in the master or slave
role. If the device role is changed, the adapter will reboot and
all paired addresses will be cleared. The command is available
when the adapter is in DIP=N status. The command will have
1 second delay.
M
Set the adapter to the master role.
(Default)
S
Set the adapter to the slave role.
?
Inquire the current role of the adapter.
RSSI=
Received signal strength indication.
?
Display the strength of signal received in command mode
when connected.
1. Strong: RSSI>-9
2. Medium:-9>RSSI>-20
3.Weak:RSSI<-20
SEARCH=
Used to search for any Bluetooth device in the environment
within one minute. If any device is found, its name and its 12-
digit-address will be listed. The search ends with a message
"Inquiry ends. xx device(s) found." This command is available
only when the adaptor is in the master role by manual.
?
Inquire Bluetooth devices in the environment, listing 8 devices
maximum
STATUS=
Inquire all the current setting of the adapter.
Y
Inquire the inner temperature of the IC in centigrade
?
Display the current setting of the adapter
