8
8.
Connect the SATA data cable to the SATA connector
on the RAID box.
Figure 8. Cable Connections
9.
Slide the RAID box into the drive bay and secure it
on each side using four mounting screws.
10. Remove the bracket from the back of the chassis
from an available expansion slot. Install the
connector bracket with 9-pin serial port and secure
it with a mounting screw. Connect one end of the
null modem cable to the 9-pin serial port and the
other end to an available serial port of the system
11. Do not connect the SATA data cable to the SATA
controller until after the RAID array has finished
initializing. See
Initializing RAID Array
on page
11 for more information.
Summary of Contents for SC-000081-S1
Page 18: ...18 Blank Page...
