4
3.
Select
Create,
then press
Enter
.
4.
Select
RAID 0
, then press
spacebar
.
5.
Select chunk size from
8k
,
16k
,
32k
,
64k
,
128k
or
256k
, then press
spacebar
.
6.
Create name, press
Enter
.
7.
When asked
Expand RAID 0 to maximum capacity
,
select
No
, then press
Enter
.
8.
Select
Exit
, then press
Enter
.
9.
When asked
Are You Sure to Exit(Yes/No)?
, select
Yes,
then press
Enter
to exit and reboot.
10. Continue with the
Fdisk
and
Format
steps as if you
were installing a conventional hard drive.
RAID 1 (Mirror)
For New/Blank Hard Drives
This RAID array to be used on
New/Blank
hard drives.
Mirroring will destroy existing data on the hard drives.
1.
As the BIOS boots press
Ctrl+R
when prompted to
enter the
RAID
BIOS.
2.
At the next screen select
RAID
, then press
Enter
.
3.
Select
Create
, then press
Enter
.
4.
At the next screen choose
RAID1,
then press
spacebar
.
5.
Create name, then press
Enter
.
6.
When asked,
Activate load balance for RAID 1
(Yes/No)?
, select
Yes
, then press
Enter
.
7.
Select
Exit
, then press
Enter
.
8.
When asked
Are You Sure to Exit(Yes/No)?
, select
Yes,
then press
Enter
to exit and reboot.
9.
Continue with the
Fdisk
and
Format
steps as if you
were installing a conventional hard drive.
